SmallBizHandbookSmallBizHandbook

Contractor Business Guide (2026): Licenses, Insurance & Startup Checklist

Last updated: 2026-10-07 · license requirements checked 2026-10-03, state insurance rules checked 2026-10-07

Short answer: A contractor business needs the basics every business needs — a state entity filing if you form an LLC or corporation, an EIN, local business licenses and tax registrations — plus state contractor license or registration; building / trade permits (per job). Insurance the law can require: license insurance / contractor bond, along with workers' comp once you hire. Exact agencies and fees depend on your state.

Get the exact list for your state

Pick a state to get the exact license list, checklist and state rules.

Licenses & permits for a contractor business

  • State contractor license or registration State

    Many states license or register contractors above a project-value threshold or for specific trades; a few leave general contracting to cities and counties. Confirm the classification you need with the agency.

    State contractor licensing boardGuide →

  • Building / trade permits (per job) Local

    Permits are pulled for each job that requires one (new construction, alterations, electrical, plumbing, mechanical). Licensing is usually checked when you pull the permit. Renewal: Per project.

    City or county building department

  • Trade licenses (electrical, plumbing, HVAC) if you self-perform that work State If it applies

    Electrical, plumbing and mechanical work generally requires individually licensed tradespeople in addition to the business's contractor license.

    State trade licensing boardGuide →

  • EPA Lead-Safe (RRP) Firm Certification Federal If it applies

    Required for firms (including sole proprietors) paid to renovate, repair or paint in pre-1978 housing or child-occupied facilities. Workers also need 8-hour RRP Renovator training. Cost: $300 (EPA fee). Renewal: Every 5 years.

    U.S. EPA (or your state, if it runs an EPA-authorized RRP program)Official page ↗

Contractor license by state →Business license lookup (state + city) →

Insurance for a contractor business

No premiums are quoted here — we only list what the law, licenses and typical contracts require.

  • License insurance / contractor bond Required by law (in some or all states)

    Many states require liability insurance, a surety bond, or both to get or renew a contractor license or registration — see your state below.

  • General liability Often required by contracts

    No state requires general liability for most businesses, but landlords, clients, general contractors and permit offices routinely do — usually with you naming them as additional insureds.

    Guide →
  • Additional insured, primary & noncontributory, waiver of subrogation Often required by contracts

    Subcontracts typically require ongoing AND completed operations AI endorsements (ISO CG 20 10 + CG 20 37) and often a per-project aggregate (CG 25 03).

    Guide →
  • Inland marine (tools & equipment, installation floater) Recommended

    BOP and property policies cover property away from your premises only up to a small limit ($10,000 in ISO's BOP). Tools, equipment and materials on job sites need a floater.

  • Builder's risk Often required by contracts

    Covers the structure under construction; construction contracts assign who buys it.

  • Umbrella / excess liability Often required by contracts

    Bigger clients and GCs often require limits above a standard $1M/$2M; umbrella sits on top of GL, auto and employer's liability.

  • Workers’ compensation Required once you hire (most states)

    The employee count that triggers coverage differs by state — see the table below.

Business owner’s policy (BOP): ISO's BOP accepts small contractors only: payroll ≤ $300,000, no exterior work above 3 stories, subcontracted work ≤ 10% of sales, no equipment rental to others.

Contractor insurance guide →Insurance requirements checker →

Insurance and bonds tied to the state contractor license, by state

Checked against each state's board, statute or rule (2026-10-07). Click a state for its license page.

StateRuleDetailsWorkers’ comp required at
AlabamaRequired for licenseLiability: GC license: proof of current liability insurance must be submitted with the prime application (board form states no minimum limit). Bond: Home Builders Board roofer license: $10,000 license/permit bond. Source5+ employees · construction: 1+ (new single-family homes)
AlaskaRequired for licenseLiability: Public liability and property damage insurance of at least $20,000 property damage, $50,000 injury/death to one person, $100,000 injury/death to more than one person (not required if every project is $2,500 or less). Bond: General contractor $25,000. Source1+ employee
ArizonaRequired for licenseBond: License bond (surety or cash) by classification and annual volume: residential general $9,000 (under $750,000) or $15,000 ($750,000+); residential specialty $4,250 or $7,500; commercial general $5,000 to $100,000; commercial specialty $2,500 to $50,000. Source1+ employee
ArkansasRequired for licenseBond: Commercial license: $10,000 contractor's surety bond (in the principal's name and EIN), plus a reviewed/audited (or, for restricted licenses, compiled) financial statement - or an optional bond in lieu of the financial statement, which does not replace the $10,000 bond. Source3+ employees · construction: 2+ (1+ if you subcontract)
CaliforniaRequired for licenseLiability: Only LLC licensees: liability insurance of $1,000,000 for 5 or fewer personnel of record, plus $100,000 per additional person, up to $5,000,000. Bond: $25,000 contractor's bond for all licensees; extra $25,000 bond of qualifying individual when qualified by an RME (or an RMO owning under 10%). Source1+ employee · construction: Some license types: even with 0 employees
ColoradoLocal licensingDORA: 'Not all occupations are licensed, such as roofers and general contractors.' Local licensing (e.g., Denver) often requires a bond and liability insurance. Source1+ employee · construction: Owners with no employees must insure or file a rejection
ConnecticutRequired for licenseLiability: General liability insurance of at least $20,000 (home improvement and new home construction contractors). Source1+ employee
DelawareRegistration onlyBond: Non-resident contractors only: surety or cash bond (or bank letter of credit) equal to 6% of the total of all contracts exceeding $20,000 for construction in Delaware (a tax-guarantee bond). Source1+ employee
District of ColumbiaRequired for licenseLiability: GC/CM commercial general liability: Class A $2,500,000 per occurrence. Bond: Home improvement contractor: $25,000 surety bond (or cash bond) for the 2-year license period. Source1+ employee
FloridaRequired for licenseLiability: Public liability / property damage (aggregate): General and Building contractors $300,000 / $50,000. Source4+ employees · construction: 1+ employee
GeorgiaRequired for licenseLiability: General liability per occurrence: Residential-Basic $300,000. Source3+ employees
HawaiiRequired for licenseLiability: Bodily injury $100,000 each person / $300,000 each occurrence; property damage $50,000 each occurrence. Source1+ employee
IdahoRequired for licenseLiability: General liability including products and completed operations of at least $300,000 single limit (certificate from an Idaho-authorized insurer). Source1+ employee
IllinoisLocal licensingThe insurance mandate applies to home repair and remodeling businesses statewide even though Illinois has no state GC license. Source1+ employee
IndianaLocal licensingIndiana AG: 'Licensing requirements vary from community to community' - check the city or county building department for license, bond and insurance rules. Source1+ employee
IowaRegistration onlyBond: Out-of-state contractors (principal place of business outside Iowa) must file a $25,000 surety bond guaranteeing Iowa taxes and unemployment contributions. Source1+ employee
KansasLocal licensingKansas Business Center: 'cities and counties set licensing requirements for construction or contracting businesses' (e.g., Johnson County, Wichita, Kansas City KS). Source$20,000+ annual payroll
KentuckyLocal licensingThe Dept. of Housing, Buildings and Construction licenses plumbers, electricians, HVAC, boiler and fire protection contractors only. Source1+ employee
LouisianaRequired for licenseLiability: Residential (and subclassifications), home improvement and mold remediation: at least $500,000 liability insurance (or $500,000 via an authorized liability trust fund) since Aug 1, 2026 - up from $100,000. Source1+ employee
MaineLocal licensingMaine AG: general contractors and trades like roofing and framing 'are not licensed or regulated.' Home construction contracts over $3,000 must be written. Source1+ employee
MarylandRequired for licenseLiability: Proof of current $50,000 liability insurance at application and every renewal; must stay in effect at all times (10 days' notice to MHIC before cancellation). Source1+ employee
MassachusettsLicense, no insurance ruleHIC registration covers work on existing owner-occupied 1-4 unit homes; the CSL covers structural work needing a permit, and the two are not interchangeable. Source1+ employee
MichiganLicense, no insurance ruleThe current application (BCC-2000, rev. 07/2026) asks only for photo ID, the 60-hour prelicensure course certificate and the fee - no insurance, bond or workers' comp proof. Source3+ employees, or 1 full-time for 13+ weeks
MinnesotaRequired for licenseLiability: $100,000 per occurrence, $300,000 aggregate, and $25,000 property damage (insurer must be licensed in Minnesota). Source1+ employee
MississippiRequired for licenseLiability: Commercial: general liability of at least $300,000 per occurrence / $600,000 aggregate. Source5+ employees
MissouriLocal licensingMissouri's Division of Professional Registration has no general contractor board; the only statewide contractor credential (electrical) is optional. Source5+ employees · construction: 1+ employee
MontanaRegistration onlyRegistration ($70) exists to enforce workers' comp: registrants with employees must carry Montana WC ('EMPLOYER' status). Source1+ employee
NebraskaRegistration onlyAll contractors and subcontractors must register; those with one or more employees must keep a workers' comp certificate (ACORD 25, DOL as holder) on file or be dropped from the list. Source1+ employee
NevadaRequired for licenseBond: License bond (surety or cash) set by the board at approval: $1,000 to $500,000 based on license type, monetary limit, financial responsibility and experience. Source1+ employee
New HampshireLocal licensingNH Attorney General: 'In New Hampshire, contractors do not need to be licensed.' Electricians, plumbers and some specialty trades are licensed by OPLC; check the town for permit rules. Source1+ employee
New JerseyRequired for licenseLiability: Home improvement contractors: commercial general liability of at least $500,000 per occurrence, kept in force for the whole registration (proof with each annual renewal). Source1+ employee
New MexicoRequired for licenseBond: $10,000 surety bond from a corporate surety authorized in New Mexico, covering the full license period, at initial licensure and every renewal. Source3+ employees · construction: 1+ (CID-licensed work)
New YorkLocal licensingNY Attorney General: home improvement contractors must be licensed in New York City and Suffolk, Nassau, Westchester, Putnam and Rockland counties; each local licensing agency sets its own insurance and bond (or trust fund) rules. Source1+ employee
North CarolinaLicense, no insurance ruleLicensing is based on financial stability (working capital), not insurance; the surety bond is only an alternative to showing working capital. Source3+ employees
North DakotaRequired for licenseLiability: A certificate of liability insurance (Secretary of State as certificate holder) must be filed with the application and each renewal; no minimum dollar amount is set in NDCC ch. 43-07. Source1+ employee
OhioLocal licensingOhio Dept. of Commerce (Apr 30, 2026): residential contractors are not required to be licensed by the state; local building departments may register or license them and set their own bond/insurance rules. Source1+ employee
OklahomaLocal licensingNo state GC license; cities set any contractor licensing. Source1+ employee
OregonRequired for licenseLiability: Residential: General $500,000 per occurrence. Bond: Residential: General $25,000. Source1+ employee
PennsylvaniaRequired for licenseLiability: At least $50,000 personal injury (bodily harm) liability and $50,000 property damage insurance; contracts must state the coverage carried. Source1+ employee
Rhode IslandRequired for licenseLiability: Public liability and property damage insurance of at least $500,000 combined single limit (bodily injury and property damage), in effect throughout registration. Source1+ employee
South CarolinaLicense, no insurance ruleBond: Residential builder: $15,000 surety bond OR proof of financial responsibility acceptable to the commission. Source4+ employees and $3,000+ payroll
South DakotaLocal licensingThe only statewide contractor credential is the contractor's excise tax license (2% tax on prime contractors' gross receipts), a tax registration with no insurance or bond requirement. SourceOptional, but you can be sued
TennesseeRequired for licenseLiability: Contractor and home improvement licenses: certificate of general liability insurance required, with the Board as certificate holder (no minimum amount stated on the board pages reviewed). Bond: Home improvement license: $10,000 surety bond (or cash/property bond or irrevocable letter of credit). Source5+ employees · construction: 1+ employee
TexasLocal licensingOffice of the Governor: 'General contractors are not required to obtain a license to practice in Texas'; cities and counties may impose registration, bond or insurance rules. SourceOptional (elective) · construction: Required on public projects
UtahRequired for licenseLiability: At least $1,000,000 per incident and $2,000,000 total, covering the full scope of work for the whole license period, with DOPL as certificate holder (previously $100,000 / $300,000). Bond: Only when required for financial responsibility (e.g., recent bankruptcy, or $1,000+ of unpaid debts/judgments/liens): the greater of 30% of the debts or $50,000 for general classifications, $25,000 for R100, $15,000 for other classifications; unincorporated entities may need a bond of 20% of owner distributions. Source1+ employee
VermontRequired for licenseLiability: Minimum liability insurance of $1,000,000 per occurrence and $2,000,000 aggregate; certificate uploaded with initial and biennial renewal applications. Source1+ employee
VirginiaLicense, no insurance ruleClass thresholds (2025): Class C over $1,000 to under $30,000 per contract. Source3+ employees
WashingtonRequired for licenseLiability: $200,000 public liability and $50,000 property damage, or $250,000 combined single limit, with L&I as certificate holder. Bond: Continuous contractor surety bond (or assignment of savings): $30,000 general contractors; $15,000 specialty contractors (amounts increased July 1, 2024; registrations renewing on or after that date must carry the higher bond). Source1+ employee
West VirginiaRequired for licenseLiability: Board's step-by-step guide lists proof of general liability insurance along with workers' comp and unemployment proof; no minimum amount stated. Source1+ employee
WisconsinRequired for licenseLiability: Option 1: general liability insurance of at least $250,000 per occurrence for bodily injury or property damage. Bond: Option 2 (instead of insurance): surety bond of at least $25,000 for an unrestricted certificate, or $5,000-$24,999 for a Restricted certificate limited to jobs no larger than the bond. Source3+ employees, or $500 wages in a quarter
WyomingLocal licensingWyoming's only statewide contractor license is for electrical work; general contractors are licensed by cities and counties where required, each with its own bond and insurance rules. SourceExtra-hazardous industries only · construction: 1+ employee (extra-hazardous)

Startup costs & financials

Free tools for contractor businesses

  • Trade License Lookup

    Check whether a state licenses electricians, plumbers, HVAC techs and general contractors at the state level, and find the…

  • Workers' Comp Estimator

    Estimate your premium from published rates for 53 class codes in all 50 states + DC, add an experience mod, compare all states,…

  • Contract Insurance Checker

    Paste or pick lease, subcontract and client insurance requirements; see gaps and the ISO endorsements to ask your agent for.

  • Contractor Agreement Generator

    Freelance-law-compliant contractor agreement (NY, IL, CA, NYC, LA, Seattle, Minneapolis), ABC-test warnings, California-safe IP…

  • Invoice Generator

    Free invoice generator with no signup or watermark. Logo, per-line taxable flags, state sales tax rates, deposits and partial…

  • Employee vs Contractor Quiz

    17 questions: IRS common-law, FLSA and your state's ABC or statutory tests for wage law, unemployment and workers' comp — cited…

  • Section 179 Calculator

    2026 § 179 ($2,560,000, phase-out $4,090,000) plus 100% bonus depreciation, SUV and luxury-auto caps, income limit and…

  • Mileage Log & Deduction Calculator

    Log trips with date, destination, purpose and miles; applies 72.5¢ (Jan–Jun) or 76¢ (from Jul 1, 2026) by trip date; monthly…

  • Startup Cost Estimator

    Itemized startup cost worksheet by industry and state: one-time and monthly costs, cash reserve, funding gap, break-even, and…

  • Business License Lookup

    Pick your state, industry and city to get a checklist of every license, permit and tax registration you need — verified fees,…

  • Compliance Checklist Generator

    Pick your state, structure, headcount and industry for a personalized checklist from verified 2026 state data: formation,…

  • LLC Cost Calculator

    Free LLC cost calculator for all 50 states + DC: filing fees, annual reports, minimum taxes, publication and 5-year totals,…

  • P&L Statement Template

    Free P&L template: monthly, quarterly or annual with prior-year comparison, industry and Schedule C layouts, margins, EBITDA…

Related guides

FAQ

What licenses does a contractor business need?

State contractor license or registration (state); Building / trade permits (per job) (local); Trade licenses (electrical, plumbing, HVAC) if you self-perform that work (state, if it applies); EPA Lead-Safe (RRP) Firm Certification (federal, if it applies). Plus your state and local general business registrations — use the license lookup for your state and city.

What insurance does a contractor business need?

License insurance / contractor bond (required by law (in some or all states)); General liability (often required by contracts); Additional insured, primary & noncontributory, waiver of subrogation (often required by contracts); Inland marine (tools & equipment, installation floater) (recommended); Builder's risk (often required by contracts); Umbrella / excess liability (often required by contracts). Workers' comp is required once you have employees in most states.

How much does it cost to start a contractor business?

It depends on location, equipment and whether you lease space. The startup cost estimator has a "Trades contractor (handyman, plumbing, electrical, HVAC)" worksheet you can edit with your own quotes; it also adds your state's actual LLC and license fees.

Official Sources

Figures checked against these sources on 2026-10-07

State agencies for each license are linked per state in the license lookup; state rules in the table link to their own sources. General information, not legal advice. State boards and cities change requirements; confirm with the agency before you apply.